Painting a pine table, if it’s the thrift-store locate or a parcel of brand new furniture, lets you give it a comprehensive conversion suited to the room’s fashion. Use white paint to get a classic clean expression, a shabby chic or cottage-style revamp, or to create an antiqued, distressed finish. Pay attention to knots on the table they might require special treatment before painting.
Pine Preparation
Prepare the table for painting so you are going to have a long-lasting, durable paint finish. Whether the table is raw, bare oak or has a sealer over it, then sand all surfaces with fine-grit seams to eliminate tiny imperfections and create the piece more receptive to the primer and paint. Prime the table with an excellent latex primer, using a second coat if the pine is still visible after the first coat dries. If your ultimate objective is to produce a distressed or worn finish and the pine is free of knots or has already been sealed, you can skip the primer.
Knotty Pine Problems
Pine trees produce wax and wax, and some of the resin remains from the knotted areas of pine boards. If your striped table is freshly manufactured or unvarnished, those knots might seep through your primer or paint if not dealt with in their own. Utilize a stain-blocking latex primer to cover the knots initially, allowing the primer to dry completely. Coat the knots again if they seemed suspiciously sappy before priming. Once the second coat dries, prime the entire table with the exact same primer or a normal latex primer.
Distressed or Dry-Brushed Finishes
For a distressed look that supplies the table an instant aged appearance, whack it a few times with a variety of sections of a hammerhead or a bag of hefty bolts and nuts. Paint it white, and then sand throughout the paint along the borders, corners and places that would normally receive the most wear. Wipe the dust away, and leave the table as-is, without a sealer, to let it wear even more. For a worn, weathered look, dip the tips of the paintbrush bristles in white paint and wipe most of the paint off on the face of the paint tray. Brush the paint over an unprimed pine table in bold strokes, overlapping it in certain places. Rub a rag over the paint to spread it around a little bit. When finished, the table looks like most of the paint has washed off, as if it was left outdoors for years.
The Layered Look
Add the expression of age and multiple paint transformations to the table by painting it a colour besides white, then waxing it and applying white over the wax. Choose a base paint colour such as charcoal gray or light green to get a vintage yet subdued look, or go bold with red, indigo or apple green. Rub candle wax over the table, particularly in places that would normally receive a good deal of wear, when the foundation color dries. Paint your favourite shade of white over the wax, and then mud through one or both paint colors in the highest wear areas, such as the borders and corners of the camel.