The duration of a chainsaw chain compares to the saw’s bar measurement. Some producers even sell replacement chains based on the the bar measurement. However, a means of specifying the length of the chain comprises two additional measurements that influence the chain matches on your saw.

Measure the distance from the tip of the chainsaw to the point at which the pub emerges from the saw casing. This information will be provided by A tape measure. When the figure was fractional or irregular round the measurement up to the nearest even number. The amount is the pub measurement. The pub measurements are 16, 18 and 20 inches.

Stretch the chain on a level surface. Look for the drive connections, which are sometimes called lugs of the chain. These hyperlinks protrude from the bottom of the chain, and they grab the drive cog, powering the chain. Count the amount of drive links on the chain.

Determine the chain’s pitch. Measure the space between any 3 rivets that hold the chain assembly. Measure from the center of one rivet into the center of the one. The rivets are noticeable between the cutters along with the drive links . To arrive in the pitch, divide the measurement by 2. When seeking replacement chains the pitch, together with the amount of drive connections, describes the length of the chain.

Examine the amount of drive links along with the pitch amounts at. The sum of both of these amounts is the length that you look for when replacing the chain of the chainsaw.

See related