You can provide your Perfect designer Concepts for designer bathrooms Milwaukee suites Pittsburgh vanity the look of real stainless steel for a fraction of the price of installing a genuine stainless steel vanity. Cover the entire vanity, for example, countertop if you desire, with a stainless steel paint or a paintlike material called liquid stainless steel which actually contains microscopic particles of stainless steel which are combined with a clear, automotive-grade leaf. Use unique tools, painting techniques and extra products to transform an ordinary vanity to your modern silvery showpiece.

Remove the vanity cupboard doors by utilizing a suitable screwdriver to take off the doors and doors and lay the items aside. Pull out the drawers and then place them aside also. Remove any knobs, drawer pulls or handles and place them next to the drawers and doors.

Sand off the shine from your vanity surfaces, like a glossy paint finish or plastic countertop, with a bit of 180 fine-grit seams to make a better bonding surface for your glue and metallic paint or liquid stainless steel.

Wipe down the exterior surfaces of the vanity, as well as the drawer and door fronts, with a clean rag dipped in a soapy solution composed of a few drops of mild dishwashing detergent mixed in a bucket of warm water to clean off any sanding particles, household dust or stains. Dry the damp surfaces with a clean, dry rag.

Attach blue painter’s tape about any adjacent Perfect designer Best Bathroom Design Ideas Milwaukee suites Pittsburgh structures you don’t want to paint, like the adjoining wall or countertop edges.

Place disposable dropcloths around the restroom floor surrounding your own vanity to capture any paint spills or drips.

Employ a paint tip to each of the exterior surfaces of the vanity as well as to the cupboard doors and drawer fronts. Brush the primer on with a paintbrush using even, sweeping strokes. Enable the primer to dry to the touch, about a hour or so browse the primer container’s instructions for details.

Roll the stainless steel wax or liquid on a small part of this dressing table at one time. Use a foam brush — a broad brush for large areas and a narrow brush for smaller surfaces — to smooth out the layer while the surface is still wet. This “smoothing technique” gives your vanity the appearance of actual stainless steel. Begin at the top and work your way down. Repeat the process to completely cover the dressing table, drawer fronts and cabinet doors. Allow the paint or liquid stainless steel to dry to the touch. Use a small paintbrush to apply paint or liquid stainless steel to corners, corners and edges.

Cover the dressing table, drawers and doors with a second coat of liquid stainless steel or paint, and then repeat the smoothing process. Allow the surfaces to dry thoroughly before applying a third coat, using the identical smoothing process you used on the first two programs. Wait at least 2 hours prior to applying a clear topcoat.

Roll on a clear polyurethane topcoat with a roller brush for large areas and a paintbrush for corners, angles and hard-to-reach spaces. Apply a second topcoat for extra shine, allowing the vanity to dry thoroughly between programs.

Remove the blue painter’s tape and then attach the cupboard doors and hardware with a screwdriver. Replace old hardware with slick, chrome pieces to boost the modern stainless steel look.

Leave a Reply

Your email address will not be published. Required fields are marked *